Skip to content
Brooklyn, NY Brooklyn, NY Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (929) 531-5990

Chimney Liner Installation in Brooklyn

Serving Brooklyn and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (929) 531-5990

The short answer

You likely need a new chimney liner if your flue is cracked, crumbling, unlined, or about to serve a new appliance or fuel, such as a boiler switching from oil to gas. EliteSweep inspects the flue with a camera, recommends the right liner, and installs and tests it with clean, contained work inside your home and on the roof.

A chimney liner is the protective channel inside your flue that carries smoke and exhaust gases up and out of the house. Many Brooklyn brownstones, row houses and older frame homes still have their original clay tile liners, or no liner at all. Decades of heat, moisture and acidic exhaust wear them down. When a liner cracks or crumbles, heat and gases can reach the brick and the wood framing around the chimney, and exhaust can leak into living spaces. EliteSweep Chimney Services installs new liners for fireplaces, wood stoves, and the oil and gas boilers and water heaters that vent through a chimney in Brooklyn and nearby neighborhoods. This page covers the warning signs, what the job includes, how our certified technicians work, and what to expect from a visit.

Signs you need a new chimney liner

Liner damage is hard to see from the room, so most homeowners notice the side effects first. Any of the signs below is a good reason to have the flue inspected before the next heating season.

  • A smoke or creosote smell in the room, especially on humid days or when the fireplace isn't in use
  • Poor draft: smoke rolling into the room when you light a fire, or a boiler or water heater that struggles to vent
  • Pieces of clay tile, mortar or flaking brick collecting in the firebox or at the cleanout at the base of the chimney
  • White staining on the brick inside or outside the chimney, a sign that moisture is moving through the masonry
  • Water in the firebox or rust on the damper after rain
  • A planned switch from oil to gas, or a new heating appliance being connected to the chimney

What's included in a liner installation

Every installation starts with an inspection, because the right liner depends on what the chimney serves and the shape it's in. For most homes that means a stainless steel liner sized to the appliance, though the inspection decides what fits your flue. Here is what the job covers:

  • A camera inspection of the full flue, with photos or video you can review
  • A written recommendation for liner type and size based on your fireplace, stove or heating appliance
  • Sweeping the existing flue to remove soot, creosote and loose debris before installation
  • Removing broken tile or obstructions where needed so the new liner runs cleanly
  • Installing the liner from the top of the chimney down to the appliance connection or smoke chamber
  • Insulation around the liner where your appliance and chimney call for it
  • A new top plate and chimney cap to keep out rain, debris and animals
  • Connecting the liner at the bottom and sealing the connection
  • A draft test and a final camera check before we leave
  • A cleanup of the work area inside the home and on the roof

How our crew works inside your home and on the roof

Inside, the crew lays drop cloths from the door to the fireplace or boiler room and covers the hearth and nearby furniture. We seal the fireplace opening or appliance connection before any sweeping starts, and we run HEPA vacuums throughout the job so soot stays out of the room. Rotary brushes clean the old flue walls, and a camera lets us check each section of the chimney instead of guessing.

On the roof, the crew sets up safe access, protects the roofing around the chimney, and feeds the liner down the flue from the top. We work carefully around shared walls and neighboring chimneys, which are common on Brooklyn row houses. When the liner is in place, we install the top plate and cap, clear away old tile and debris, and leave the roof as we found it.

The standards we follow

We work to NFPA 211, the national standard for chimneys, fireplaces and vents. It calls for these systems to be inspected once a year. Chimney professionals use three inspection levels. Level 1 applies when nothing about the system has changed. Level 2 applies when the system changes, such as a new appliance or a switch of fuel, or when the home is sold. Level 3 applies when a hidden hazard can only be reached by opening part of the chimney or building. Because a new liner is a change to the system, liner work starts with at least a Level 2 inspection.

New York City adds its own considerations. When a building converts its boiler from oil to gas, the chimney has to be evaluated as part of the work. A new liner is often needed, because gas exhaust produces acidic condensate that can corrode a masonry flue. The city's heat season also runs from October 1 through May 31, when building owners must keep apartments heated to the city's minimum temperatures. If you own a multi-unit building, plan liner work for late spring or summer so the heating system isn't out of service when tenants need it.

What affects the price

Every chimney is different, so we price liner work after the inspection rather than quoting blind. The main factors are:

  • Chimney height and how easy it is to reach the roof
  • The fuel and appliance the liner will serve: wood, gas or oil
  • Flue size and shape, and whether the flue is straight or has offsets
  • The condition of the existing flue and how much old tile has to come out
  • How much soot and creosote buildup needs to be cleaned first
  • Whether insulation, a new cap, masonry repair or extra camera work is needed

How a visit works

First, you contact us and describe what you're noticing, along with the type of fireplace or heating appliance. We schedule an inspection, and a certified technician examines the chimney from inside and on the roof, runs a camera through the flue, and shows you what we found.

Next, you get a written recommendation and price for the liner and any related work, with no pressure to decide on the spot. Once you approve it, we schedule the installation. Many single-flue jobs are finished in one visit, while taller chimneys or flues that need tile removal can take longer. On installation day, the crew protects your home, sweeps the flue, installs and connects the liner, caps the chimney, tests the draft, and cleans up. Before we leave, we walk you through the final camera footage.

Chimney Liner Installation by city

What to expect

How a visit goes

  1. We look before we recommend

    We inspect the flue, damper, crown, cap and connections first, then tell you what we found. Recommendations come from what is in your chimney, not from a standard package.

  2. We keep your home clean

    Drop cloths go down before any work starts, and soot and debris are contained and carried out. We leave the room the way we found it.

  3. We explain it in plain English

    You will hear what each problem is, why it matters, and what happens if you wait. If something can safely be left for later, we say so.

FAQ

Common questions

Don’t see your question? Call (929) 531-5990 and we’ll talk it through.

How do I know if my chimney has a liner?

Many homes have clay tile liners you can see at the top of the chimney, but some older Brooklyn homes have none. A camera inspection is the reliable way to confirm whether a liner exists and what condition it's in.

Do I need a new liner if I'm switching my boiler from oil to gas?

Often, yes. In New York City, the chimney has to be evaluated during an oil-to-gas conversion. Gas exhaust produces acidic condensate that can corrode a masonry flue, so a new liner is frequently required.

Can a cracked clay tile liner just be repaired?

Minor damage in a few tiles can sometimes be repaired, depending on where it is and how the flue is built. Widespread cracking, missing tiles or a flue that will serve a new appliance usually calls for a new liner. The inspection tells us which applies.

Will liner installation make a mess in my house?

Most of the work happens from the roof. Inside, we use drop cloths, seal the fireplace or appliance opening, and run HEPA vacuums so soot and debris stay contained.

When is the best time to install a liner?

Late spring and summer are ideal, especially for multi-unit buildings, because the city's heat season runs from October 1 through May 31. That said, a damaged liner serving a heating appliance should be addressed as soon as it's found.

Do I still need yearly inspections after a new liner?

Yes. NFPA 211 calls for chimneys, fireplaces and vents to be inspected once a year, even when the liner is new.

Schedule a chimney or vent inspection

Tell us what you are noticing, whether it is smoke, smells, leaks or a slow dryer. We will inspect, show you photos, and give you a written price before any work begins.

Call (929) 531-5990 Request Service