Skip to content
Brooklyn, NY Brooklyn, NY Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (929) 531-5990

Chimney Inspection Levels: Level 1, Level 2 and Level 3 Explained

A chimney inspection is not one fixed procedure. Chimney professionals use three inspection levels described in the NFPA 211 standard, and the right one depends on what has happened to your chimney since it was last checked. This guide explains what each level covers, when it makes sense, what you receive afterward and how to get your home ready. EliteSweep Chimney Services performs inspections across Brooklyn for fireplaces, wood stoves, and the flues that serve oil and gas boilers and water heaters.

Why Chimneys Need a Yearly Inspection

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. That applies whether you burn wood every weekend or rarely light a fire, because chimneys change even when they sit idle. Mortar wears down, crowns crack, animals build nests, and flue liners can deteriorate out of sight.

In New York City, heat season runs from October 1 through May 31, and boiler and water heater flues work hard during those months. Scheduling the yearly inspection before the cold weather gives you time to handle any repairs before the system is under steady use.

Level 1: The Standard Annual Inspection

A Level 1 inspection is the right choice when nothing about your chimney or the appliance connected to it has changed and you plan to keep using it the same way. It is the baseline check most homes need each year.

The technician examines the readily accessible parts of the system and confirms that the chimney is structurally sound, that the flue is free of blockages and combustible deposits, and that clearances to nearby combustible materials look right where they can be seen. No walls are opened and no permanent parts of the structure are removed.

  • Visible chimney exterior, crown and cap
  • Firebox, smoke chamber and damper where accessible
  • Connection between the appliance and the flue
  • Signs of creosote buildup, blockage or animal entry

Level 2: When Something Has Changed

A Level 2 inspection includes everything in Level 1 and goes further, usually with a video camera run through the full length of the flue. It also covers accessible areas of attics, basements and crawl spaces that the chimney passes through. NFPA 211 calls for this level when the system changes or the home is sold. Common reasons to schedule a Level 2 inspection include:

Fuel conversions deserve special attention in New York City. When a building converts its boiler from oil to gas, the chimney has to be evaluated as part of the work, and a new liner is often needed. Gas exhaust produces acidic condensate that can corrode a masonry flue, so a flue that served an oil burner may not be suitable for gas without changes.

  • Switching fuel, such as converting a boiler from oil to gas
  • Installing a new stove, insert or boiler, or relining the flue
  • Buying or selling a home
  • After a chimney fire, even one that seemed minor
  • After a storm, lightning strike or other event that may have damaged the chimney

Level 3: Reaching Hidden Hazards

A Level 3 inspection is reserved for situations where a serious problem is suspected but cannot be confirmed without opening part of the chimney or building. That can mean removing a section of interior wall, a chase panel or masonry to reach a concealed area.

This level is not routine. It is typically recommended when a Level 1 or Level 2 inspection turns up evidence of a hidden hazard, such as signs of heat damage near framing, or after significant damage from a chimney fire or structural event. Before any removal begins, we explain what needs to be opened, why, and what restoration will involve, so you can make an informed decision.

What You Receive After Your Inspection

Every inspection ends with documentation you can keep and share. Our certified technicians walk you through what they found and leave you with a clear record.

The report is useful for insurance conversations, real estate transactions and planning future work. If repairs are needed, such as chimney repair, chimney liner installation, a new chimney cap and chase cover, chimney waterproofing, or fireplace and damper repair, we explain the options without pressure to decide on the spot.

  • Photos of key areas, including any damage or wear
  • Video footage of the flue interior for Level 2 and Level 3 inspections
  • A written report describing the condition of each component
  • Recommendations that separate safety issues from routine maintenance

How to Prepare for the Visit

A little preparation helps the inspection go smoothly and keeps your home clean.

If the flue has heavy creosote buildup, the technician may recommend a chimney sweep before or alongside the inspection so the flue surfaces can be seen clearly. Ask about this when you schedule.

  • Stop using the fireplace or stove the day before so the firebox and flue are cool
  • Clear a few feet of space around the fireplace, stove or boiler
  • Move fragile items off the mantel and nearby shelves
  • Make sure attic, basement and crawl space access points are unlocked and reachable
  • Keep pets and children away from the work area
  • Gather any records of past sweeps, repairs or appliance changes

Inspections

Three levels of chimney inspection

The NFPA 211 standard calls for a yearly inspection. Which level you need depends on what has changed since the last one.

  1. Level 1

    Annual check

    For a chimney and appliance that have not changed and will be used the same way: the readily accessible parts of the chimney, the flue and the connection, checked for soundness, blockages and deposits.

  2. Level 2

    Camera inspection

    When something changed — a new stove, insert or boiler, a fuel switch such as oil to gas, the sale of the home, or a chimney fire, storm or quake. Adds a video scan of the whole flue and the accessible attic, roof and crawl spaces.

  3. Level 3

    Concealed areas

    Only when a Level 1 or 2 points to a hidden hazard that cannot be checked any other way: parts of the chimney or building are opened to reach it.

How each level works

FAQ

Common questions

Don’t see your question? Call (929) 531-5990 and we’ll talk it through.

How often should my chimney be inspected?

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. For most homes with no changes to the system, that yearly visit is a Level 1 inspection.

Which inspection level do I need when buying or selling a home?

A Level 2 inspection. NFPA 211 calls for this level when a home is sold, because the new owner needs a full picture of the flue, including camera footage and a review of accessible attic, basement and crawl space areas.

Do I need an inspection if I rarely use my fireplace?

Yes. Chimneys deteriorate from weather, moisture and animals even when they are not in use, and the boiler or water heater flue in many homes runs all heat season regardless of the fireplace.

My building is converting from oil to gas. Does the chimney need attention?

Yes. In New York City the chimney has to be evaluated as part of an oil-to-gas conversion, and a new liner is often needed because gas exhaust produces acidic condensate that can corrode a masonry flue. A Level 2 inspection is the appropriate starting point.

Will a Level 3 inspection damage my home?

A Level 3 inspection involves opening part of the chimney or building, such as a wall section or chase panel, to reach a suspected hazard. We explain exactly what needs to be removed and what restoration involves before any work begins.

Is an inspection the same as a chimney sweep?

No. A sweep removes creosote, soot and debris from the flue, while an inspection evaluates the condition and safety of the system. They are often scheduled together so the technician can see clean flue surfaces.

Schedule a chimney or vent inspection

Tell us what you are noticing, whether it is smoke, smells, leaks or a slow dryer. We will inspect, show you photos, and give you a written price before any work begins.

Call (929) 531-5990 Request Service