Chimney, Dryer Vent and Air Duct Cleaning for Brooklyn Homes
We sweep, inspect and repair chimneys and clean dryer vents and air ducts for homes in Marine Park, Mill Basin, Sheepshead Bay, Midwood, Gravesend and the neighborhoods around them.
- Diagnosis before any repair
- Photos of every finding
- Written price before we start
Services
Chimney and duct work we do
From a routine sweep to a full rebuild, we handle the chimney, fireplace and venting work Brooklyn homes need. Every job starts with a look at the whole system, so you know what each service is for before you agree to it.
Warning signs
Call us if you notice any of these
Most problems give a warning first. Catching them early keeps a small fix from turning into a big one.
- Smoke drifts into the room when the fireplace is lit
- A strong campfire smell from the fireplace on humid days
- Clothes still damp after a full drying cycle
- Water stains on the ceiling or wall beside the chimney
- Bits of brick, mortar or flue tile in the firebox
- Scratching or chirping sounds coming from inside the chimney
- Certified technicians do the inspection and the work
- You get a written price before any work begins
- We show you photos of what we found
Straight pricing
No bait prices. No surprises.
-
Written price first
Before any work begins, you get the price in writing for the specific job we discussed. Nothing starts until you approve it.
-
Photos of what we found
We photograph the problems we find inside and on top of the chimney or vent. You see what we see, and you can keep the images for your records.
-
No surprise add-ons
The price you approved is the price for that work. If we find something new along the way, we stop, show you, and ask before doing anything more.

About us
Chimney and vent work, explained before it starts
EliteSweep Chimney Services cleans, inspects and repairs chimneys, fireplaces, dryer vents and air ducts across southern Brooklyn. The housing here is a mix of attached brick rowhouses, detached frame homes, and co-ops and small apartment buildings with boiler chimneys, and each one vents a little differently. Every visit starts with a look at the whole system, from the firebox or appliance connection up to the crown and cap, so we can tell you what is actually going on before anyone picks up a tool. Our technicians are certified, and they explain what they see in plain terms, with photos you can keep. If a sweep is all you need, that is all we recommend. If we find cracked flue tiles, a failing crown, a rusted damper or a vent packed with lint, we show you, write up the price, and let you decide. We cover floors and furniture, keep soot contained, and clean up before we leave. The goal is a chimney that works safely and a homeowner who knows what was done and why.
More about how we workHow it works
Clear steps. Your approval first.
-
Book a visit
Call or send a short request: the fireplace, stove, boiler flue or vents you need looked at, and what you have noticed.
-
We inspect first
The crew lays down drop cloths, checks the system top to bottom and runs a camera up the flue where it is needed.
-
Written price, your call
You see photos of what we found and get the price in writing. Work starts only after you say yes.
-
Clean, fix, report
We sweep, repair or reline, vacuum up with HEPA filters and leave you a photo report of the finished work.
Book before the first cold night
Fall is the busiest time for chimney sweeps. Get your sweep and yearly inspection on the calendar before you light the first fire.
Inspections
Three levels of chimney inspection
The NFPA 211 standard calls for a yearly inspection. Which level you need depends on what has changed since the last one.
-
Level 1
Annual check
For a chimney and appliance that have not changed and will be used the same way: the readily accessible parts of the chimney, the flue and the connection, checked for soundness, blockages and deposits.
-
Level 2
Camera inspection
When something changed — a new stove, insert or boiler, a fuel switch such as oil to gas, the sale of the home, or a chimney fire, storm or quake. Adds a video scan of the whole flue and the accessible attic, roof and crawl spaces.
-
Level 3
Concealed areas
Only when a Level 1 or 2 points to a hidden hazard that cannot be checked any other way: parts of the chimney or building are opened to reach it.
Where we work
Every kind of home in Brooklyn
-
Rowhouses and brownstones
Attached homes often share chimney stacks and party walls with neighbors, so flues sit close together and roof access can be tight. We confirm which flue is yours before cleaning or repairing anything.
-
Detached homes
Freestanding houses usually have more exposed chimney above the roofline, which takes the brunt of wind, rain and freeze-thaw cycles. Crowns, caps, flashing and waterproofing get extra attention here.
-
Co-ops and apartment buildings
Boiler chimneys in multi-unit buildings need to keep working through the heat season, so we plan the work around tenants and heating needs. Oil-to-gas conversions also call for a chimney evaluation and often a new liner.
Service areas
Where we work
We work throughout southern Brooklyn, including Madison, Marine Park, Mill Basin, Bergen Beach, Flatlands, Sheepshead Bay, Manhattan Beach, Gerritsen Beach, Midwood, Homecrest, Mapleton and Gravesend. If your neighborhood is nearby but not listed, ask us.
- MadisonLocal service & repairs
- Marine ParkLocal service & repairs
- Mill BasinLocal service & repairs
- Bergen BeachLocal service & repairs
- FlatlandsLocal service & repairs
- Sheepshead BayLocal service & repairs
- Manhattan BeachLocal service & repairs
- Gerritsen BeachLocal service & repairs
- MidwoodLocal service & repairs
- HomecrestLocal service & repairs
- MapletonLocal service & repairs
- GravesendLocal service & repairs
How often should my chimney be inspected?
The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. Yearly inspection catches buildup, cracks and water damage before they turn into bigger problems.
What are the different inspection levels?
A Level 1 inspection is used when nothing about the system has changed. Level 2 is called for when something changes, such as a new appliance or a switch of fuel, or when the home is sold. Level 3 is needed when a suspected hidden hazard can only be reached by opening part of the chimney or building.
Do I need a new chimney liner if we switch from oil to gas?
Often, yes. When a New York City building converts its boiler from oil to gas, the chimney has to be evaluated as part of the work. Gas exhaust produces acidic condensate that can corrode a masonry flue, so a new liner is often needed.
Why does dryer vent cleaning matter?
According to the U.S. Fire Administration, failure to clean is the leading factor contributing to clothes dryer fires in homes. Lint collects in the duct behind the dryer and in the run to the outside, where you cannot see it. Longer drying times and a hot laundry room are common signs it is time.
Will air duct cleaning help with allergies?
The U.S. EPA says duct cleaning has not been shown to prevent health problems. It does advise cleaning when there is substantial visible mold growth, vermin, or excessive dust and debris. We check your ducts first and tell you honestly whether cleaning is worth doing.
When is the best time to schedule chimney work?
Before you start using your fireplace or heating system for the season. New York City's heat season runs from October 1 through May 31, so late summer and early fall are good times to have chimneys and boiler flues checked.
Will chimney cleaning make a mess in my home?
We cover the floor and nearby furniture, seal off the fireplace opening, and contain the soot as we work. When we are done, we clean the work area before we leave.
Request service
Tell us what’s going on
Share a few details and we’ll call you to confirm the visit. Prefer to talk? (929) 531-5990
Schedule a chimney or vent inspection
Tell us what you are noticing, whether it is smoke, smells, leaks or a slow dryer. We will inspect, show you photos, and give you a written price before any work begins.