Skip to content
Brooklyn, NY Brooklyn, NY Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (929) 538-3375

Chimney Inspection in Bensonhurst, Brooklyn

Serving Bensonhurst and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (929) 538-3375

The short answer

Chimneys in Bensonhurst should be inspected once a year, as the NFPA 211 standard calls for, and more thoroughly when you change appliances or fuel or sell the home. EliteSweep Chimney Services sends certified technicians from nearby Bay Ridge to inspect rowhouses, multi-family homes and apartment buildings and explain the findings in writing.

Bensonhurst homes rely on chimneys that work hard from fall through spring. Whether you live in an attached brick rowhouse, a two-family home, a detached house or a pre-war apartment building, the chimney carries exhaust from a boiler, furnace, water heater or fireplace out of the house. EliteSweep Chimney Services inspects chimneys across Bensonhurst from our office in Bay Ridge, about 2 miles away. Our certified technicians look at the whole system, explain what they find in plain terms, and give you a written summary so you can decide what, if anything, needs to happen next.

How often should a Bensonhurst chimney be inspected?

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. That applies whether you burn wood a few nights each winter or your chimney only vents a gas boiler. A flue that is used for heating every day still collects soot, debris and moisture damage, and problems often develop out of sight.

Chimney professionals use three inspection levels, and the right one depends on what has happened since the last check:

  • Level 1: a check of the accessible parts of the chimney, firebox and appliance connections when nothing about the system has changed.
  • Level 2: a more detailed inspection, including the inside of the flue, when the system changes, such as a new boiler or water heater or a switch of fuel, or when the home is being sold.
  • Level 3: needed when a suspected hidden hazard can only be reached by opening part of the chimney or the building.

What we check in Bensonhurst rowhouses and multi-family homes

Much of Bensonhurst is made up of attached brick rowhouses, two- and three-family homes, detached houses and older apartment buildings. Many of these chimneys are tall masonry stacks that serve more than one appliance and sit close to neighboring roofs and walls. During an inspection, our technicians check:

After the visit you get a written summary, with photos where they help, so you can see what we saw instead of simply taking our word for it. If you are buying or selling a home in Bensonhurst, a Level 2 inspection gives both sides a clear picture of the chimney before closing.

  • The crown, cap and exterior brick and mortar for cracks, gaps and loose material
  • The flue liner for cracks, missing sections, corrosion or blockages
  • The connector pipes from the boiler, furnace or water heater and how they enter the chimney
  • The firebox, damper and smoke chamber on wood-burning fireplaces
  • Signs of water entry, such as staining, white mineral deposits or damaged flashing
  • Nests, debris and creosote buildup that can restrict the draft

Oil-to-gas conversions and chimney liners

Many older homes and buildings in the area have switched their boilers from oil to gas or are planning to. In New York City, the chimney has to be evaluated as part of that conversion. A new liner is often needed, because gas exhaust produces acidic condensate that can corrode a masonry flue originally used for oil.

If you are planning a conversion, or one was done without a chimney check, a Level 2 inspection tells you the condition of the flue and whether a liner is in place and suited to the new appliance. With your permission, we can share our findings with your heating contractor.

When to schedule your inspection

New York City's heat season runs from October 1 through May 31. During those months building owners must keep apartments heated to the city's minimum temperatures, so a chimney problem that shuts down a boiler is more than an inconvenience. Booking an inspection in late summer or early fall leaves time for any repairs before the heating load picks up.

Schedule sooner if you notice smoke or fumes coming back into the house, a strong odor near the fireplace or boiler room, bricks or mortar falling onto the roof, water stains near the chimney, or animals in the flue. Those signs should not wait for the yearly visit.

Serving Bensonhurst and nearby neighborhoods

Our office is in Bay Ridge, about 2 miles from Bensonhurst, so getting a technician to your home is usually simple. We also inspect chimneys in Bath Beach, Dyker Heights, Borough Park, Bay Ridge and Sunset Park. Whether you own a single-family house, manage a small multi-family building or are buying a home, we match the inspection level to your situation.

More services in Bensonhurst

Related

FAQ

Common questions

Do I need a chimney inspection if I only use my fireplace a few times a year?

Yes. The NFPA 211 standard calls for a yearly inspection regardless of how often the fireplace is used. Light use can still leave creosote, and nests, debris and water damage can build up when a chimney sits idle.

My chimney only vents a gas boiler. Does it still need to be inspected?

Yes. Gas exhaust produces acidic condensate that can wear down a masonry flue over time, and blockages or a damaged liner can push exhaust back into the house. A yearly inspection catches these problems early.

What inspection level do I need when buying a home in Bensonhurst?

A Level 2 inspection is the standard choice when a home is sold. It goes beyond a basic visual check and includes the inside of the flue, giving buyers and sellers a clearer picture of the chimney's condition.

We are converting our boiler from oil to gas. Should the chimney be checked?

Yes. In New York City the chimney has to be evaluated as part of an oil-to-gas conversion, and a new liner is often needed because gas exhaust can corrode a masonry flue built for oil.

When is the best time to schedule a chimney inspection?

Late summer or early fall is ideal, before New York City's heat season begins on October 1. That leaves time for repairs before your heating system is running every day.

Which neighborhoods near Bensonhurst do you serve?

Besides Bensonhurst, we inspect chimneys in Bath Beach, Dyker Heights, Borough Park, Bay Ridge and Sunset Park. Our office is in Bay Ridge, about 2 miles from Bensonhurst.

Ready to get started?

Call (929) 538-3375 Request Service